Cycle Keo
Installing New Road Bicycle Pedals
Installing new pedals yourself is quick and easy.
You will need the following
* Allen key and/or pedal wrench
* Grease
Removing the old pedals:
Removing the old pedals from your crank can be easily done with either the bike on the floor or in a work stand.
Note: Pedals like the Look Keo Carbons do not accept a pedal wrench. These pedals will require an Allen key that can be placed in the spindle from the back side. Be careful you might have a cadence magnet in there – so remove it before you attempt to remove the pedal.
If using a work stand, place your hand on the rear wheel or grab the brake to stop the wheel from spinning.
The right pedal will come off just like any other bolt system you’ve used. Turning the spindle counter clockwise (left) will loosen the pedal. However, the left pedal is reversed threaded and will need to be turned clockwise (right) to loosen. Don’t be surprised if you need to put your shoulder into it; water and time may have removed the grease, causing them to stick.
Installing the new pedals:
With the old pedals removed, clean out the threads on your crank arm – removing any dirt or old grease. Grab your grease and new pedals. Place a strip of grease on both threads of the pedals.
With the new pedals greased use your fingers to catch the threads and snug them up to your crank arm. Avoid using tools until they are finger tight. Remember the left pedal is reversed thread. Take your time, there is nothing as disappointing as stripping your crank.
With your new pedals finger tightened take your Allen key or pedal wrench and snug them up to your crank arm. Typically a quarter or half turn passed finger tight is enough. When they are firmly in place use a rag to wipe up the excess grease. Now recheck your pedals, ensuring they are firmly in place.
On your first few rides check your pedals to ensure they are still snug against your crank.
If you do a lot of wet weather riding it may be prudent to remove your pedals and apply new grease from time to time. If you’ve ever had your pedals seize to a crank arm you’ll know why it’s worth the extra effort.
We Keep You Cycling
Caution – failing to properly install your pedals can cause serious injuries. If you have any questions about the above please contact us for clarification. Our guide is a guide intended to aid you in doing your own work. If you have any questions its best to seek help prior to riding.
Bestselling LOOK Cycle Keo 2 Max Carbon Road Pedal
|
|
Kool Kovers Look Keo Cleat Cover $12.29 Kool Kovers eases walking and prevents cleat wear. Made from high-quality thermoplastic elastomer providing long lasting performance with greater durability while maintaining pliability in a wide temperature range.Fits red, gray, and black KeO cleatsPrevents mud and dirt build-upLightweight, flexible and durableMade from high-quality thermoplastic elastomerEasy to attach, remove and storeLong-last… |
|
|
Look KEO X5 Cleat Cover $9.98 Look Cleat CoversAnti-slip design also protects cleats while walkingItem SpecificationsColorBlackUnit of SalePairCleat Bolt PatternLook… |
|
|
Look Keo Cleats Gray – w/ 4 deg Float. $13.95 Look Keo Cleats Gray – w/ 4 deg Float. Bi-Material design has teflon inserts in the cleat-pedal interface for easy release and float. Classic three bolt Look design . Bi-material, teflon and polyacetal. Memory clip allows cleat replacement to the exact position of the previous cleat. Compatible with all Look KeO standard pedals. Float: 4 deg. |
|
|
Look KEO Bi Material Cleat $19.95 The Keo Cleat is made from polyamide nylon with Teflon toe and heel inserts, for durability and lightness. It’s smaller and has a lower profile than most cleats, so it’s lighter. And it doesn’t squeak while you’re pedaling like some other cleats do, so you get a quieter, more enjoyable ride. Plus, wear indicators tell you when it’s time for new cleats…. |
|
|
Look KEO Road Bike Cleat Cover – 6007196300 $9.99 Match with all Look Keo cleats….. |
|
|
PowerMadd rail Star Hand Guard $24.95 PowerMadd Trailstar Series Hand Guards with Optional Mounting Kits. Available in 8 great colors to match your ride! Get the ultimate in hand protection for your ATV or snowmobile. More: Fully adjustable to your needs; Adds that authentic racing look to your sled.; Mounting Kit: Simple installation; Includes brackets, hardened steel straps and stainless steel hardware; ATV and snowmobile models ava… |